Frank's Scale Model Aircraft Art!

Wingnuts Wings Albatros DVa - 1/32!!

Part 6!

I plan to build this version!

The rigging was not described much, but tricky to do using 0.015

hardened stainless steel wire inserted into holes I had previously

drilled into the wings and fuselage. Since the SS wired was hardned

and resistant to "bending", the holes had to be pre-aligned so that

the wire would not look "bowed" after inserting through the entrance

holes and then poking into the target holes. 

 

Upper surface colors: Tam Medium Gray Green XF-71, and Mauve as Tam X-16 (1) to Tam XF 52 (2). Over sprayed lightly with Testors Glosscote.

Sub assembly now taking shape.

Panel detail showing "Wood Graining" of varnished birch plywood effect better!

 

  

My 52nd+ Build!

Comments are always appreciated!

Email me

Albatros DVa Part 1!

Albatros DVa Part 2

Albatros DVa Part 3!

Albatros DVa Part 4!

Albatros DVa Part 5!

Back to the cover page!

Please Visit: Deep Space 99 -- My Astro Imaging Site

Hit Counter

These webpages are Copywrited 1997- 2008, belong to, and have been constructed by, J. Frank Loch - Amateur Astronomer & Scale Model Builder. No part of these pages may be used for any purpose with out my written permission. They are dedicated to the memory of Grayce Loch - (1931-1999)